Chip tuning files Fiat
125.00

Fiat - 199 - Grande Punto 1.4 T-JET 120 HP - (2009) - 1.4 - Bosch - ME7.9.10 - 51822805 - 0261201684 - 391689 - Bosch ME7.9.10 120hp – 200nm - 160hp – 280nm

OfflineMapTune ECU Tuning
Vendor
Select the files you want

I'm not sure if my car has the exact same original file as shown here, please manually modify my original based on the advertised file.

Buy/Download now
Report Abuse
Chip tuning files

Stage 2 software package for Fiat Grande Punto 1.4 T-JET 120 HP This software has been tested and optimized many times. It brings out the highest power with the OEM turbo (IHI VL37 Series). Engine condition may vary in engine power. Decat or sport cat is recommended. (None P0420). Turbo pressure setting: 1.5 bar max peak pressure @ 2500 RPM 1.2-1.0 bar cont pressure 0.65 bar pressure @6400 RPM   Added boost cut for 1.65 bar.   Added 2 Step Soft Launch Control @ Step1- 4000 RPM. Step2- 5000RPM   Added Ignition Cut Rev Limiter @6400 RPM   Added Burble&Crackle @2700-6000 RPM   Ignition advance optimized for 95 oct.   Knock control has been optimized.   With 98-100 oct fuel, 1.5-2.25 degrees ignition advance will increase.   The throttle closes for 9 seconds when there is excessive knock.   Engine coolant temperature up to 40 degrees, engine speed is limited to 3000 RPM. It gradually rises between 40 and 60 degrees. It is raised to 6400 RPM over 60 degrees. Over 100 degrees, 3000 RPM is lowered.

The vendor has uploaded their files and can be downloaded directly after paying. Even if software and hardware numbers of ECU are the same, it could be it is different because different tuning tools can have a different way of reading/writing cutting parts of the software or adding code. You need to use the tuning modifications and copy them into your own original file or let vendor customize the file for you.

POWER GAINS
CAR POWER
ORIGINAL
120 hp
200 nm
AFTER TUNING
160 hp
280 nm
DIFFERENCE
+40 hp
+80 nm
Type Car
Producer Fiat
Series 199
Model year 2009
Model Grande Punto 1.4 T-JET 120 HP
Use type Engine
Producer Bosch
Build ME7.9.10
ECU-Nr. Prod. 51822805
ECU-Nr. ECU 0261201684
Software 391689
Version Bosch ME7.9.10
Type Turbo-Petrol
Displacement 1.4
Gear Manual
Reading tool KTAG
Type of tuning Stage 2
Including checksum? YES
Including original file? NO
Dyno tested? YES
Customization & Support to customer YES
Check the original file of customer YES